0533-7700666
中文站   English
PRODUCTS

Resistance to sulfur shift catalyst

Hydrogenation catalyst

Gas purification series catalyst

Claus sulfur recovery catalyst

Oil additives

Contact Us
  • ZiBo Luyuan Industrial Catalyst Co.,Ltd.

  • TEL:0533-7700666
  • FAX:0533-7706888
  • E-MAIL:ly7700666@126.com
  • ADDRESS:shandong zibo JingZhong industrial zone
LYTS-01TiO2 sulfur recovery catalyst series

A, product features and uses

LYTS-01TiO2 catalyst is a catalyst for sulfur recovery effect of TiO2 radical anti sulfate. The catalyst is compared with the AL2O3 based catalyst is currently theindustry to promote the use of, has the following characteristics:

Firstly, the organic sulfur hydrolysis reaction and H2S and SO2 Claus reaction has high catalytic activity, almost reach thermodynamic equilibrium.

Second, the "O2 leak" poisoning is not sensitive, hydrolysis resistant "O2 leak"poisoning ability is 2000PPm, Claus reaction is as high as 10000PPm, and onceruled out the effects of high concentration of O2, activity was almost completely restored.

The, to achieve the same conversion level, allowing shorter contact time about 3seconds, the equivalent of 100012000h-1 airspeed, thus can reduce the reactor volume.

The performance of LYTS-01 catalyst and matters needing attention are as follows:

Index two, product

The colour and shape of the white strip type

Outline dimension (mm) - 4 ± 0.5 × 5-20

TiO2% >83

The specific surface area (m2/g) >100

Bulk density (kg/L) 0.951.05

Crushing strength (N/cm) ≥ 120

The wear rate (%) <1.0

In layered loading when in use, the LYTS-01 catalyst loading in the lower part ofthe first reactor bed temperature higher, about the total bed volume 1/3 ~ 1/2, in order to facilitate the hydrolysis of organic sulfide.

Three, packaging, transportation and storage of catalyst

Packaging made of hard board barrel LYTS-01 catalyst, lined with plastic bag (or according to user requirements packaging). The catalyst should pay attention to moisture, avoid rolling in the process of transportation, collision, intense shock,should rain facilities. The catalyst should be stored in dry and ventilatedwarehouse, to prevent contamination and moisture.

Home       About       News       Products       Honor       Contact
Copyright © ZiBo Luyuan Industrial Catalyst Co.,Ltd. All Rights Reserved. Powered By XunFengNet
Top